Hörmann Garage Door Remote Compatibility
Share
Are Hörmann Garage Door Remotes Universal?
Hörmann garage door remotes are not universal: the correct handset depends on the frequency and generation of your motor unit. This guide explains the Hörmann remote frequency families, how to identify which one you need and what to do if your original handset is no longer available
Hörmann remote frequency families
Hörmann have used several different radio frequencies across their motor units over the years. Remotes from one frequency family will not work with motors from another. The easiest way to identify which family your motor belongs to is by the colour of the buttons on your existing handset.
| Handset appearance | Frequency | System | Era |
|---|---|---|---|
| Grey case, vivid green buttons | 26.995MHz | Older ProMatic / SupraMatic | Pre-2000 |
| Grey case, light grey buttons | 40.685MHz | EcoMatic | Early 2000s |
| Grey case, light blue buttons | 868.3MHz | ProMatic / SupraMatic Series 2/3 | 2005 to 2015 |
| Black case, black buttons | 868.3MHz BiSecur | Series 3/4 BiSecur | 2013 onwards |
| Various, cigarette lighter plug | 433.92MHz | EcoStar / Liftronic / Rollmatic | Various |
BiSecur remotes: compatible across the current range
Hörmann BiSecur remotes (black case, black buttons, 868.3MHz) are compatible across all current Hörmann BiSecur operators. A BiSecur remote can also control non-garage-door Hörmann products including entrance doors, gates and lights fitted with a BiSecur receiver. Within the BiSecur family, any handset with the "BS" designation in the model number (HS2BS, HSE4BS, HSE2BS etc.) will pair with any BiSecur-equipped motor.
BiSecur remotes use 128-bit AES encryption with rolling code technology. Each button press generates a new unique code, making signal interception and cloning effectively impossible.
Older frequency systems: what are your options?
Handsets for the older 26MHz and 40MHz systems are no longer manufactured. If your original handset for these systems has been lost or damaged, the options are:
- Universal receiver kit: A receiver module that plugs into or replaces the existing receiver in the motor, allowing you to use a modern 868MHz BiSecur handset with an older motor unit.
- 868.3MHz non-BiSecur handset: Some older 868MHz motors (grey case, blue buttons) will accept a replacement 868MHz handset without BiSecur. Check the motor series before ordering.
- Motor unit replacement: Where the motor is very old and parts are unavailable, replacing the motor unit is often more cost-effective than sourcing obsolete electronics.
Can I add a second Hörmann remote to an existing motor?
Yes. Most Hörmann BiSecur operators can store multiple handsets. The programming procedure is the same as for the original handset: hold the programming button on the motor unit while pressing the button on the new handset to be added. Consult your motor's manual for the specific sequence, as it varies slightly between Series 3 and Series 4 units.
Will a Hörmann BiSecur remote work with a Garador motor?
Garador and Hörmann are the same product under different branding in the UK. Hörmann BiSecur remotes are fully compatible with Garador GaroMatic and EuropPro operators that use the BiSecur system. Check the motor unit label for the BiSecur designation before ordering.
Hörmann Garage Door Spares
Genuine and pattern replacement parts for all Hörmann garage door types. Fast UK delivery.
More Hörmann guides on remotes, springs, locks, cables and common faults in the Hörmann Spares hub.
Visit the Hub